Daly City / Doors & Windows

Picture, Custom & Arched Window Replacement in Daly City

The big view window or odd-shaped arch is cloudy, cracked, or so dated that a standard rectangle will not match it.

Woman looking at a large arched window with a white frame.

The symptom

The big view window or odd-shaped arch is cloudy, cracked, or so dated that a standard rectangle will not match it.

The proposed method

Confirm who will measure or template the opening and approve the final shape and dimensions before fabrication. Ask the supplier to identify the proposed glazing and assembly, and the installer to describe access, removal, support and perimeter finishing. Record responsibility for checking the custom unit against the opening before installation is arranged.

Items to discuss

custom fixed window, radius or geometric frame, insulated glass, setting blocks, structural fasteners, flashing, perimeter sealant. Clarify which parts or materials would be supplied, which tools would be used, and what documentation is included.

Property context in Daly City

The city boomed after the 1906 earthquake and was incorporated in 1911, so older post-earthquake housing is part of its built history.

Source for building history ↗

The air district’s 2011 regional climate description notes frequent cool, foggy summer weather in coastal Peninsula towns. This is regional outdoor context, not an assessment of a property’s equipment or indoor conditions.

Source for local exposure ↗

Daly City's Building Division publishes a building maintenance permit covering, in the city's own words, the replacement of an electrical service upgrade, furnaces, garage doors, roofs, siding, termite work, water heaters, windows and other similar replacement work. If the job being discussed is a straight replacement of one of those, ask whether it is handled as a maintenance permit. Confirm the address and the proposed scope with the Building Division; this page does not decide what your property requires.

Source for planning your work ↗

California licenses contractors by classification, and the Contractors State License Board publishes the current list. Glazing work sits under C-17 Glazing Contractor, so it is reasonable to ask which classification a licence carries and to check the licence number with the board before glass or window work is arranged. The classification list describes the trades the state recognises; it is not a record of any particular company's licence, standing or suitability for your project.

Source for local context ↗

Area-wide context is not a finding about your own property.

What shapes the quote?

The component being changed

Glass-only, hardware-only and complete-frame work involve different materials and labor. Compare proposals for the same work.

Access and concealed condition

Opening size, access, finishes and damage discovered during removal can change the work. Agree how any change will be documented.

The complete proposal

Clarify removal, disposal, weatherproofing, finish restoration and completion checks before comparing totals.

Ask for a written quote and confirm the complete charge before work begins.

Before the visit

A little preparation helps.

Identify the affected opening and describe the symptom.Gather available product labels and previous work records.Explain access restrictions and keep the opening clear.

0 of 3 details ready

Before you decide

Good questions.
Clearer next steps.

What does picture, custom & arched window replacement involve?

What should the proposal say about parts, materials and equipment?

Discuss custom fixed window, radius or geometric frame, insulated glass, setting blocks, structural fasteners, flashing, perimeter sealant. Ask the provider to distinguish existing parts to inspect, proposed replacements, and tools, materials or reports included in the service. Request a reason for any replacement and confirm compatibility with your equipment. A list of possible items does not mean that every item must be supplied or replaced.

Can a difficult sliding door be repaired without replacing the frame?

A sticking panel can involve rollers, track damage, alignment or worn seals. Ask which condition was observed and whether compatible parts are available. A sound frame may remain in place for a targeted repair; deterioration at the sill or frame can change that scope. Compare the actual findings before choosing a complete replacement.

Does fog between panes mean the whole window needs replacement?

Moisture between the panes is different from condensation on a room-facing surface. A proposal may replace the sealed glass unit while retaining a suitable sash and frame. Ask which component has failed, how the replacement glass is specified and whether the existing frame can support the work.

How do insert and full-frame window replacement differ?

An insert retains a suitable existing frame and places a replacement unit within it. Full-frame work removes more of the assembly and exposes the opening for assessment. Compare retained materials, flashing work, trim restoration and the resulting clear opening rather than treating both proposals as the same job.

What should I compare on a window performance label?

Compare the ratings for the complete product and its suitability for the local climate and project. U-factor and solar heat gain coefficient describe different aspects of performance. Ask which specified unit the label describes; a generic brochure does not establish the rating of the product being supplied.

What information helps prepare a door or window visit?

Describe the opening, how it moves and what changed. Note whether a concern is with glass, the moving panel, hardware or the surrounding wall. If available, gather product labels, earlier invoices and photographs taken without dismantling the assembly. Explain access restrictions and keep people away from broken glass.

What should the written scope include?

Ask which units and components are included, what remains in place, how access and removal are handled, and who restores affected finishes. Confirm product specifications, disposal, weatherproofing and completion checks. Any concealed damage discovered during the work needs an explained change to the agreed scope.

Is a photograph enough to order an arched or custom-shaped replacement?

A photograph helps identify the shape, but the order needs the supplier’s approved dimensions and drawing or template requirements. Marvin distinguishes quarter-round, half-round and elliptical options in its Ultimate range. Ask who confirms the actual curve and opening dimensions; the label arched does not identify one interchangeable shape.

Are all specialty-shaped windows fixed shut?

No. Marvin offers both fixed and opening specialty shapes. Ask whether the proposed unit is fixed or operable and identify the exact product configuration, including hardware if it opens. An opening example from one range does not establish that every shape and size can be supplied that way.

Does cloudy or cracked glass mean the custom frame must be replaced too?

Ask for separate findings on the glass and the frame, followed by an explanation of the proposed glass-only or complete-unit scope. The assessment needs to establish how the glazing is retained and whether a suitable replacement assembly is available. The unusual shape alone does not answer which existing parts can remain.

What details matter when matching a custom window to nearby glazing?

Review the curve or polygon drawing alongside the visible frame profile, glass appearance and grille layout. Marvin lists different divided-lite arrangements and glazing profiles for its Ultimate specialty windows. Ask which details the selected product can reproduce and have any differences recorded before fabrication; a similar silhouette is not a complete visual match.